• 100 Ton Press Brake How To Buy
• Otc Tools

Hello I have a Promecam RG 104 100 ton about 13ft in length manufacture date 1974.The problem I have is that the right side of the lower beam sat about.375 lower than the left side I was able to jack up the right side and rotate the lower right side cam clockwise about 25 deg. Now the beam sits.188 lower better but still a problem.I have bought 2 different manuals but neither one gets into any detail about adjustments I also called Amada about this issue but did not get any help. Also do the graduated drums on either end of the lower beam have any thing to do with this adjustment.

Any help with this issue will be greatly appreciated. I had the same problem with mine. I think it happens when someone press to hard on one side of the press. I've straighten it up with the cam as you did. If you are at max setting on one side you can loosen the other side a bit. My press didn't had the drum, but I suppose it some kind of stop to prevent upsetting the straightness when bending on one side. In the manual it's important that you reset the intermediate as the manual, after you play with the cam to get the final ajustement.

The manual is relatively clear on how to setup intermediate. I had the same problem with mine. I think it happens when someone press to hard on one side of the press. I've straighten it up with the cam as you did. If you are at max setting on one side you can loosen the other side a bit.

My press didn't had the drum, but I suppose it some kind of stop to prevent upsetting the straightness when bending on one side. In the manual it's important that you reset the intermediate as the manual, after you play with the cam to get the final ajustement. The manual is relatively clear on how to setup intermediate.What Manual do you have?

The two manuals I've bought do not get into any adjustments nothing more than user manuals.

100 Ton Press Brake How To Buy

Instruction Manuals Spare Parts Manuals Operating Manuals We have available a wide variety of machine manuals / instruction manual (s) / operator manual (s) for presses, press brakes, guillotines and other metal working machinery. The range of manuals include some of the following: Press / Press Brake Manuals - All Purpose Engineers, Bliss Welded Products, Aida, Komatsu, Butler, Wilkins and Mitchell, Cincinnati, Chalmers & Corner, Chin Fong, E W Bliss, Forward Down, Goetz, Heim, HME, Horden Mason & Edwards, John Heine, Massey, Minster, Roveta, Promecam and more.

Otc Tools

Guillotines - A P Lever, Acroshear, Amada, Bliss Welded Products, Chalmers & Corner, Cincinatti, Dye Industries, E W Bliss, Edwards, Ermaksan, Fabricated Products, Fisher Horton, Hydracut, Hydrashear, John Heine, Kleen Pacific, Pearson, Promecam, Welded Products, William Wallbank and more.